User`s guide

Maintaining the printer 4-7
User’s Guide for Magna™ Platinum Series™ Printers
2 Clean the two pick rollers:
If the printer has a locking card cartridge, unlock the cartridge before
removing it.
a Remove the card cartridge.
b Remove the cap from the cleaning pen. Hold the end of the cleaning pen
against the first pick roller (step 1 in Figure 4-7).
Figure 4-7: Clean the pick rollers
c Click the Clean Printer button in the Printer Toolbox. Click OK on the prompt
that appears. Do not insert a cleaning card! The driver sends a command to
the printer to run the printer cleaning card. The printer moves rollers when it
attempts to pick the card.
d Slowly move the pen on the pick roller.
e Lightly wipe any dirt from the end of the cleaning pen onto a clean cloth or
paper. Move the cleaning pen to another area of the roller.
f Repeat steps c through e until no more dirt appears on the pen.
g Repeat steps c through f, placing the cleaning pen on the second pick roller
(step 2 in Figure 4-7).
3 Clean the transport area rollers:
If the printer has a locking cover, unlock the cover before opening it.
a Open the printer cover and remove the print ribbon cartridge. The card
cartridge should stay out of the printer.
E
1
2
i