User`s guide

4-4 Maintaining the printer
User’s Guide for Magna™ Platinum Series™ Printers
Replace the cleaning roller
If the printer has a locking cover, unlock the cover before opening it.
1 Lift the top cover to open the printer.
The printer power can be on or off when you replace the cleaning roller.
2 Press down on the swing arm until it clicks (step 1 in Figure 4-3). The push latch
releases the swing arm. Lift the swing arm by firmly grasping the handle and
pulling up until it is fully open (step 2 in Figure 4-3).
Figure 4-3: Open the swing arm
3 Remove the print ribbon cartridge.
4 Lift the continuous cleaning roller unit out of the printer (step 1 in Figure 4-4).
Figure 4-4: Lift the roller out of the printer
5 Slide the used sleeve off the cleaning roller spindle (step 2 in Figure 4-4). Discard
the used sleeve.
E
E
1
2
2
1