User`s guide

1-10 Overview
User’s Guide for Magna™ Platinum Series™ Printers
Back of the printer
Figure 1-7 shows the back of the Magna printer:
Figure 1-7: The back of the Magna printer
If the printer includes an optional laminator module, that module extends farther than
the ports and receptacles area.
Find the following on the back of the printer:
Data Port
The printer includes two data ports. Select only one data port to use.
• ECP parallel port
Use the ECP parallel port to connect the printer's data cable to the PC, if the
printer was ordered with a parallel cable.
• USB data port
Use the USB data port to connect the printer's data cable to the PC, if the printer
was ordered with a USB cable.
Power switch
Use the Power switch to power on or power off the printer.
Power receptacle
This is the receptacle for connecting the power cable.
Power switch
Power receptacle
ECP parallel port
USB port
Optional smart card serial port
Optional smart card serial port
Data port
Security lock receptacle
Optional smart card USB port