User`s guide

B-4
User’s Guide for Magna™ Platinum Series™ Printers
Datacard recommends that laminate patches not be applied over magnetic stripes
or signature panels.
Full-card laminate can be applied to contactless (RF) smart cards.
Figure B-1: "Genuine Authentic" holographic laminate or topcoat
Custom material, including custom holograms, are available on topcoat or laminate
material. Contact your Datacard representative for more information.
DuraGard
1.0 mil Clear
Laminate
553277-101 Metal only Full-card die-cut polyester
patches, 1 mil thick, on a carrier
material.
About 250 uses.
DuraGard
Smart Card
1.0 mil Clear
Laminate
553277-102 Metal only Die-cut polyester patches, 1 mil
thick, on a carrier material. Patch
covers all of the card except the
area of the smart card chip.
About 250 uses.
DuraGard
0.5 mil Clear
Laminate
557171-001 Either Full-card die-cut polyester
patches, 0.5 mil thick, on a
carrier material.
About 300 uses.
DuraGard
Smart Card
0.5 mil Clear
Laminate
557171-002 Either Die-cut polyester patches, 0.5
mil thick, on a carrier material.
Patch covers all of card except
the area of the smart card chip.
About 300 uses.
Name Part number Heater roller Description
i
i
ICIV082U
Genuine
Authentic