User`s guide

SR200 & SR300 Card Printers and LM200 & LM300 Laminators User’s Guide 43
temperaturedropsiftheprintergoestosleep.SelectDisabletokeeptheheatroller(s)at
operatingtemperature,evenwhencardsarenotbeingprinted.
Ifalaminatorisinstalled,theHRControlsettingalsoaffectsthelaminatorhea troller.The
roller(s)returntooperatingtemperaturewhenthenextcardis
printed.Thedefaultis
Enable.
YoucanviewthissettingontheLCDpanel(refertotheHeatRollermenuoptioninthe
“UsingtheLCDPanelMenus”onpage 51),andontheLaminatortaboftheStatus
Monitor(referto“LaminatorTab”onpage 47).
 Others,including:
 AcontroltoenableordisabletheLCDdisplaybuzzer.
 AcontroltosettheLCDdisplaycontrast.
 AcontroltosettheLCDdisplaymode.
 AcontroltochangetheLCDdisplaycounter.Selectthetypeofcountertobedisplayedon
theLCDpanel.
Retransfer Tab
UsetheRetransfertabtospecifyhowimagesaremovedfromtheretransferfilmontothecards.
TheRetransfertabdisplaysthe:
 FrontSidematrixandaBackSidematrixforsettingthe
retransferspeedandtemperature.Clickasquaretoselect
thetemperaturesetting.
 UVSpeedsliderforsettingthespeedoftheretransfer
heatroller(cardfrontandback)whenUVinkisused.
 CardType(read‐only).UsetheMediaSettingtab(page 44)
tospecifythecardtypebeingused.
TipsforSuccess
 Thetransferpowertothecardgetsstrongertowardstheupperright,butthecardbecomes
moredistortedduetotheheat.
 Changingtheretransfertemperatureononecardsidealsoaffectsthetemperatureonthe
othersideofthecard.
 Therecommendedrangeofvaluesdependsonthetypeofcardbeingused.UsetheMedia
SettingtabtospecifythecardtypewiththeMediaSettingtab.(Refertopage 44for
instructions.)
Foradescriptionofthefivetypesofcounter,refertothePropertyTabonpage 46.