User`s guide

SR200 & SR300 Card Printers and LM200 & LM300 Laminators Users Guide A-7
01052E00 Optionaldevicesarenotinstalled. —
0105**** Acommanderrorhasoccurred. Contactyourserviceprovider.
010B****
0142A200 Retransferfilmhasrunout.
1. LoadtheRetransferFilm.(Refer
to“LoadingRetransferFilm”onpage16.)
2. Pre ssResetandthen(Return)to
initializetheprinter.
0142B200 Inkribbonhasrunout.
1. Loadtheinkribbon.(Referto“Loadingan
InkRibbon”onpage15.)
2. Closetheprinterdoor,andpressReset
andthen(Return)toinitializethe
printer.
02****** Printerisnotfound.
 MakesurethatthehostPCandtheprinter
areconnectedproperly.
 Makesurethattheprinterispoweredon.
05000050 Failureoccurredduringcard
loading.
 Makesurethatthatthelaminatoris
properlyconnectedtothecardprinter
(Referto“CheckingtheLaminator
Connection”onpage20).
 Removethecard.
05000051 Cardjamnearthecardfeedroller.
 Thetemperatureoftheheatingrollermay
betoohigh,orthecardtransferspeed
maybetooslow.Fordetailsonadjusting
optimumsetting,pleaseconsultan
authorizeddealer.
 Removethejammedcard.
05000052 Cardjamnearthecardoutlet.
05000053 Top‐sidefi lmhasrunout.
 Replacethelaminatefilmwithanewone.
05000054 Bottom‐sidefilmhasrunout.  Replacethelaminatefilmwithanewone.
ErrorCode DisplayedMessage Solution