User`s guide

A-4 Status Monitor Messages
0103A100 Retransferfilmisbroken. 1. Repairtheinkribbonasdescribedin
“MendingaBrokenInkRibbonor
RetransferFilm”onpage90.
2. Pre ssResetandthen(Return)to
initializetheprinter.
Retransferfilmisnotdetected. Installtheretransferfilmcorrectly.(Referto
“LoadingRetransferFilm”onpage16).
0103A800 Awritingerrorhasoccurredduring
magneticencoderself‐diagnosis.
Checkthecardspecifications.
0103AD00 Anerrorhasoccurredduring
magneticencodingdatawriting.
Checkthecardspecifications.
0103AE00 Anerrorhasoccurredduring
magneticencodingdatareading.
Checkthecardspecifications.
0103B000 Anincorrectinkribbonisinstalled. Installacorrectinkribbon.
0103B100 Inkribbonisbroken.
1. Repairtheinkribbonasdescribedin
“MendingaBrokenInkRibbonor
RetransferFilm”onpage90.
2. Pre ssResetandthen(Return)to
initializetheprinter.
Inkribbonisnotdetected.
1. Loadtheinkribboncartridgeorretransfer
filmcartridgeandthenclosetheprinter
door.
2. Pre ssResetandthen(Return)to
initializetheprinter.
0103**** Amediaerrorhasoccurred. Makesurethatthecardsyouareusing
conformtothecardspecifications.
ErrorCode DisplayedMessage Solution