User guide

SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide 85
HR-T Overheat Heating roller temperature
error (temperature is too
high).
Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Overheat-T Internal temperature error
(temperature is too high).
Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Heater-B Heater error. Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Heater-T Heater error. Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Thermistor-B Heating roller sensor
temperature error.
Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Thermistor-T Heating roller sensor
temperature error.
Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Cam-B Heating roller pressing
operation error.
Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Cam-T Heating roller pressing
operation error.
Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
HR-BTOverheat Heating roller temperature
error (temperature is too
high).
Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Overheat-T Internal temperature error
(temperature is too high).
Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Heater-T Heater error. Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Thermistor-T Heating roller sensor
temperature error.
Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
Cam-T Heating roller pressing
operation error.
Turn the power switch off, and then back on. Contact
your service provider if this does not correct the
condition.
LCD Message Possible Cause Solution