Installation guide

Table Of Contents

SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 37

5. ClickNextontheInstallationscreen.

6. Selecttheprintermodelthatcorrespondstotheunitnumber.Forexample,iftheunit

numberis6,thenselectSR‐CPU6.ClickNext.

7. EnteraSharenameorusethedefaultspecified.ClickNext.

ThedefaultprinternameistypicallyU1.Theunitnumberselectedheremustmatchthe

unitnumbersetontheprinter’sLCDpanel.(Re ferto“SettingtheUnitNumber,Printer

Name,andConnection”onpage 59tofindorchangetheprinter’sunitnumbersetting.)