Installation guide

SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 29
6. Selecttheprinterthatcorrespondstotheprinter’sunitnumber.Forexample,iftheunit
numberis6,thenselectSR‐CPU6.ClickNext.
7. EnteraSharenameorusethedefaultspecified.ClickNext.
ThedefaultprinternameistypicallyU1.Theunitnumberselectedheremustmatchthe
unitnumbersetontheprinter’sLCDpanel.(Re ferto“SettingtheUnitNumber,Printer
Name,andConnection”onpage 59tofindorchangetheprinter’sunitnumbersetting.)