User`s guide

12 SR200 & SR300 Plug-in User’s Guide
Deleting a Magnetic Stripe Encoder Configuration
1. OpenanID Worksprojectthathasacarddesignwithamagneticstripefield.
2. SelectthemagneticstripefieldandopentheEditFieldProperties[MagneticStripe]dialog
box.Refertotheonlinehelptopic“Addamagneticstripefieldtoacard”forstep‐by‐step
instructions.
3. Onthe
Encodingtab,selectDatacardSR‐CRretransfermagneticstripeplug‐infromthe
Devicelist.
4. ClickEditConfigurations.TheDatacardSR‐CRretransfermagneticstripeConfigurations
dialogboxopens.
5. SelecttheconfigurationyouwanttodeleteandclickRemove.
Aconfirmationdialogboxopens.
6. ClickYestoremovetheconfiguration.
7.
ClickExittoclosetheDatacardSR‐CRretransfermagneticstripeConfigurationsdialogbox
andthenclickOKtoclosetheEditFieldProperties[MagneticStripe]dialogbox.