User`s guide

SR200 & SR300 Plug-in User’s Guide 9
Creating a New Magnetic Stripe Encoder Configuration
1. OpenorcreateanID Worksprojectthathasacarddesignwithamagneticstripefield.
2. SelectthemagneticstripefieldandopentheEditFieldProperties[MagneticStripe]dialog
box.Refertotheonlinehelptopic“Addamagneticstripefieldtoacard”forstep‐by‐step
instructions.
3.
OntheEncodingtab,selectDatacardSR‐CRretransfermagneticstripeplug‐infromthe
Devicelist.
4. ClickEditConfigurations.TheDatacardSR‐CRmagneticstripeConfigurationsdialogbox
opens.
5. ClickNew.TheNewMagneticStripeConfigurationdialogboxopens.
To create a new configuration by copying an existing configuration, refer to “Changinga
MagneticStripeEncoderConfiguration”onpage 10
.