User`s guide
Table Of Contents
- Title page
- Contents
- Chapter 1: Overview
- Chapter 2: Getting started
- General requirements
- Selecting the site
- Electrical requirements
- Physical requirements
- Environmental requirements
- Unpacking the printer
- Who to call for assistance
- Connecting the printer
- Loading cards
- Loading the print ribbon
- Powering on the system
- Installing the printer driver
- Setup tips
- Making and evaluating test cards
- Printer test card
- Chapter 3: Using the printer
- Chapter 4: Maintaining the printer
- Chapter 5: Advanced Information
- Chapter 6: Troubleshooting
- App. A: Safety and compliance
- App. B: Supplies and cards
- App. C: PC settings
- App. D: Magnetic stripe encoding
- Index

Getting started
2-7
User’s Guide for Express™ and Select™ Class Printers
Figure 2-4: Load cards into the card cartridge
4 Replace the card cartridge into the card cartridge cavity. Push the bottom of the
card cartridge toward the printer until it clicks into place (see Figure 2-5.).
Figure 2-5: Replace the card cartridge
Loading the print ribbon
The printer uses print ribbon with color panels, continuous color, or color and topcoat.
To order new ribbon, contact your service provider. See “Supplies and cards” on
page B-1 for ordering information.
Magnetic Stripes
iSEL007u
1
2