User`s guide

User’s Guide for Express™ and Select™ Class Printers
2
2
Getting started
This section describes how to install and set up the Datacard®
Express™ or Select™ Class photo ID printer. It describes:
•
General requirements for using the printer
•
Selecting the site
•
Unpacking the printer
•
Who to call for assistance
•
Connecting the cables
•
Loading supplies, including cards, and print ribbon
•
Powering on the printer
•
Installing the printer driver
•
Printing test cards
General requirements
When choosing a site for the Express or Select printer and its supplies, consider the
following general requirements:
•
Keep all dust, dirt, food, liquids, etc. away from the Express or Select printer at all
times.
•
Keep the top cover closed at all times, except when changing supplies, fixing
problems, or performing maintenance.
•
Do not use supplies or cards that have been dropped on the floor or have
otherwise become contaminated.
•
Keep paper and foreign materials off the Express or Select printer.
•
Do not block the back air vents or fan opening on the Express or Select printer.
•
Place the Express or Select printer on a stable platform; keep it off the floor.
•
Place the Express or Select printer away from direct sunlight.
•
Place the Express or Select printer away from heating ducts, blowers, or other air
vents.
•
Do not use the Express or Select printer for purposes other than its intended use.
•
When cleaning around the Express or Select printer, prevent debris from entering
the printer.