User`s guide

5-16 Using the printer
User’s Guide for the ImageCard® IV Printer
5 Depending on the situation, the message box might be removed automatically or
you might need to respond. Cards still in the printer might be ejected.
The message box can have one or more of these buttons:
– Retry: Clears the card from the printer. The driver sends the card or cards to
the printer again. If the problem is corrected, normal operation resumes.
– Cancel: Clears the card from the printer. The card is not sent to print again. If
the problem is corrected, normal operation resumes.
– OK: Used for a message that occurs when no card was being printed, a status
message, or an equipment failure message. If the problem is corrected,
normal operation resumes. (Power cycle the printer if operation does not
resume.)
6 If the message box disappears automatically, decide whether to return to the card
creation application to send the card to print again.
♦
Shutting down the printer and PC
Shut down the printer and the PC to which it is attached when you are done making
cards for the day or will be away from the system for an extended period of time.
Shut down the printer and PC
1 Make sure all cards have completed processing before turning off the power.
(Choose Suspend in the Printer Toolbox to stop communication between the
printer and driver.)
2 Press the Power button to turn off power to the printer.
Figure 5-10: Press the power button to power off the printer
3 Follow your policy to secure unprinted card stock, supplies, and printed cards. For
example:
– If the printer has the lock option installed, make sure the input and output
trays and covers are latched securely in place. Lock the printer cover.
ICIV186U
Power button