User`s guide

5-14 Using the printer

User’s Guide for the ImageCard® IV Printer

4 Hold the card output tray and release the output tray card pusher.

5 Replace the output tray cover. If the printer has a lock, lock the printer.

♦

Remove rejected cards

Remove rejected cards from the reject bin when the "Reject bin full" message appears

or when removing completed cards. Cards are rejected by the optional particle

detector and when a problem occurs while personalizing a card.

1 If the printer has a lock, unlock the printer. Lift the output tray cover and set aside

(step 1 in Figure 5-8).

2 Lift the cards from the reject bin (step 2 in Figure 5-8).

Figure 5-8: Remove rejected cards

3 Dispose of partly processed cards according to your policies for handling the

confidential data that might be on the cards.

4 Replace the output tray cover. If the printer has a lock, lock the printer.

♦

Responding to messages

The printer provides information to the printer driver about the status of cards being

processed. If the printer is not able to process and print a card, the printer driver

generates a message on the PC in response to this situation. In most cases, the

message is displayed on the PC. Some applications manage printer driver messages,

and those messages might be different than described in this section.

In some circumstances, the printer might beep and the status light blink amber without

a message appearing on the PC. The most likely causes are:

• Renaming the printer (Restart Windows to fix the problem)

ICIV004U