User`s guide

Loading supplies 4-17
User’s Guide for the ImageCard® IV Printer
If you have more than one optional station, make sure you match the cartridge
with the station.
2 Align the topcoat cartridge so the spools in the cartridge are over the spindles in
the station.
Figure 4-13: Replace the topcoat cartridge
3 Lower the topcoat cartridge into the printer (step 1 in Figure 4-13).
4 Press down firmly to seat the topcoat cartridge in the printer.
If the cartridge becomes stuck part of the way into the station, turn the supply
and take-up knobs clockwise slightly so the spindle ribs fit between the
spool ribs.
5 Press the lock to secure the topcoat cartridge in the printer (step 2 in Figure 4-13).
6 Move the supply tracker toward the full supply roll until it rests on the supply roll
(step 3 in Figure 4-13).
7 Close the cover of the printer and press to latch it. If the printer has a lock, lock the
printer.
♦
i
iciv148u
2
1
1
3
E