User`s guide

Loading supplies 4-3
User’s Guide for the ImageCard® IV Printer
Figure 4-2: Remove the print ribbon cartridge
3 Move the printhead cage to the resting position (step 2 in Figure 4-2).
4 Using the handle, lift the print ribbon cartridge straight up until the cartridge is
above the printhead cage (step 3 in Figure 4-2). Remove the cartridge from the
printer.
Some cartridges have a movable handle while others have two non-movable
handles.
♦
Loading print ribbon in the cartridge
After removing the print ribbon cartridge, remove the used ribbon and put new ribbon
in the cartridge.
Load print ribbon in the cartridge
1 Place the print ribbon cartridge on a level surface, such as a table, with the handle
down and the glide rollers toward you. (See Figure 4-3.)
If the cartridge has a movable handle, fold the handle down so the cartridge is
stable.
2 Pull up to remove the used supply spool and full take-up spool from the cartridge.
Dispose of used ribbon according to your policy.
The print ribbon has a negative image of the information printed on the card.
Dispose of ribbon according to your policy for protecting the data that might
be visible on it.
3 Unwrap the new print ribbon.
iciv168u
1
3
2
E
E
E