User`s guide

3-4 Setting up the printer
User’s Guide for the ImageCard® IV Printer
Verify that serial port settings are correct using the steps in “PC port settings” on
page C-1.
♦
Connect the power cord
1 Attach the power cord to the power receptacle on the back of the printer (step 1 in
Figure 3-3).
Figure 3-3: Attach the power cord
2 Plug the other end of the power cord into a single phase,
3-wire grounded receptacle with 90-130V AC or 195-254V AC at 50 or 60 Hz (step
2 in Figure 3-3).
The printer power supply automatically adjusts to the voltage of the input power.
♦
Unlocking the cover
If your printer has an optional locking cover, follow this procedure to unlock the cover.
The printer might be unlocked for shipping.
Unlock the cover
1 Insert the key into the lock (step 1 in Figure 3-4). The key fits the lock only one
way.
2 Push down and turn the keylock one-quarter turn clockwise to open the lock
(step 2 in Figure 3-4).
ICIV052U
1
2
E