User`s guide

Getting started 2-5
User’s Guide for the ImageCard® IV Printer
4 Slide the printer and packing material out of the shipping carton (step 1 in
Figure 1-2).
5 Remove the back shipping cushion (step 2 in Figure 1-2).
6 Remove the accessory bag (step 3 in Figure 1-2). Remove this User's Guide from
the bag.
7 Remove the top shipping cushions (step 4 in Figure 1-2). Set the shipping
cushions aside.
8 Remove all the wrapping around the printer.
The printer weighs 60 to 75 pounds (27 to 34 kilograms). Use proper lifting
techniques. Make sure you have enough people to lift the printer comfortably.
Figure 1-3: Remove the printer from the shipping cushion
9 Lift the printer and move it to its operating location (step 1 in Figure 1-3).
10 Save all packing material, including the shipping carton, shipping cushions, and
accessories bag.
11 Push down on the corner of the printer's top cover to unlatch it (step 1 in
Figure 1-4). Lift the top cover to the fully upright position (step 2 in Figure 1-4).
If your printer has a lock, see “Unlocking the cover” on page 3-4 for the steps to
unlock the printer. First, check to see if the printer is unlocked.
!
iciv051u
1
1
2
i