User`s guide

Getting started 2-3
User’s Guide for the ImageCard® IV Printer
• Single phase, 3-wire grounded receptacle only
The maximum input current for the ImageCard IV printer is 5 amps at 100 VAC
applied.
Physical requirements
The ImageCard IV printer requires an environment that accommodates its physical
dimensions and weight.
The printer weighs between 60 and 75 pounds or 27.3 and 34.1 kilograms. The weight
varies depending on the options installed in the printer.
The surface holding the printer might also need to bear the weight of other
equipment such as a PC and camera.
The dimensions are:
• Width of 21.8 inches (54.4 cm)
• Depth of 26 inches (64.8 cm)
• Height of 11 inches (27.5 cm)
Figure 1-1: ImageCard IV dimensions and clearance
The clearance required is:
• 3 inches (7.5 cm) in back of the printer, for an overall depth of 29 inches (72 cm).
• 19 inches (48.3 cm) above the printer to allow the cover to open, for an overall
height from the work surface of 30 inches (75 cm).
i
ICIV045U
21.8 in.
54.4 cm
30 in.
75 cm
11 in.
27.5 cm
26.0 in.
64.8 cm
3 in.
7.5 cm