User`s guide

C-7
User’s Guide for the ImageCard® IV Printer
Figure C-4: Communications Port Properties dialog box
5 Choose the Port Settings tab.
If the PC has more than one serial port, make sure you view the settings for
the serial port to which the smart card module is attached.
6 Choose the following settings:
7 When the settings are correct, click OK to save settings and close the dialog box.
♦
PC settings for Windows Me and 98
This section describes the following for PCs running Windows Me and 98.
• Setting parallel port values
• Setting serial port values
Setting Value
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
i