User`s guide

7-16 Maintaining the printer

User’s Guide for the ImageCard® IV Printer

3 Push down on the corner of the printer's top cover to unlatch it. Lift the top cover

to the fully upright position.

4 Remove the print ribbon cartridge. See “Removing the print ribbon cartridge” on

page 4-2.

5 Put on the ESD strap. Follow the instructions with the strap.

6 Push the locking tabs to the side (step 1 in Figure 7-13). Remove the printhead

cable from the printhead board (step 2 in Figure 7-13).

Figure 7-13: Remove the printhead cable from the board

Move the cable away from the printhead to avoid pinching the printhead cable

wires.

7 Press the printhead cage stop (step 1 in Figure 7-14) and move the printhead

back (step 2 in Figure 7-14).

iciv178u