User`s guide

Maintaining the printer 7-3

User’s Guide for the ImageCard® IV Printer

5 Close the printer's top cover and push down to latch it.

6 Remove the card input tray cover. Hold the tray and latch the card pusher in the

notch on the bottom of the card input tray. Move cards back to rest on the card

pusher.

Do not touch the printing surface of the cards.

7 Peel off the protective paper from the cleaning card.

Figure 7-1: Remove the protective paper from the cleaning card

8 Place the cleaning card in the card input tray as shown in Figure 7-2. Insert the

end of the card into the pick rollers.

Make sure the sticky side of the card is toward the card pusher and the lower

edge of the cleaning card rests on the bottom of the tray.

If the card separator is set to pick cards that are thinner than 0.035 inch,

change the card separator setting. See “Printing thicker or thinner cards” on

page 3-8 for more information.

Figure 7-2: Place the cleaning card between the card input guide rollers

9 At the PC, open the Printer Toolbox if needed by double-clicking the icon in the

lower right corner of the desktop.

10 Select the Clean Printer button on the Printer Toolbox. Click the OK button on the

message box.

iciv070u