User`s guide

XPS Card Printer Driver Guide 69
•
Donotputdatafortwotracksonthe
sameline..
• Donotallowtexttoencodetowrap
toanotherline.
• Datatoencodecanbeonside1
(fron t)orside2(back)ofthecard.
4. Addanextraspacecharactertotheend
ofthedata.
5. Selectalineofdatauptotheextraspace
characterandapplyoneofthefollowing
fonts:
• MagTrack1XPSCardPrinter
• MagTrack2XPSCardPrinter
• MagTrack3XPSCardPrinter
• MagTrackJISXPSCardPrinter
6. RepeatSteps3–5foreachlineoftextto
encode.
7. Sendthecardtoprint.
8. Verifythattheencodingwassuccessfulbypassingthecardthroughacard
reader.
H
INTS&TIPS
• Donotusecharacterformatting,suchaskerning.
• Donotusesmartquotes.
• Useasmallfontsizetoshortenlinesoftexttoencode.
• Keeptexttoprintonadifferentlinefromtexttoencode.
• WhentheCardPrinterDriveraddslinesoftextforthesametrack,the
sequenceisdeterminedbytheapplication.Testyourapplicationwiththe
CardPrinterDrivertomakesurethedataisinthecorrectorder.
• MagneticstripedatasentbytheCardPrinterDriverisalwaysencodedon
side 2ofthecard.