User`s guide

XPS Card Printer Driver Guide 65
•
Ifnecessary,youcanusetwoormorelinesoftextforonetrack.Startand
endeachlinewithescapecodes;enteracarriagereturnattheendofthe
line.TheCardPrinterDriveradds(appends)linesforthesametrack
together.
• Datatoencodecanbeonside1(front)orside2(back)ofthecard.
• Donotenterdatatoprintonthesamelineasdatatoencode.Itwillnot
print.
4. PressENTE Rtoendaline.
5. RepeatSteps3and4foreachtrackofmagneticstripedata.
6. Withmagneticstripecardsintheprinter,sendthecardtoprint.
7. Verifythattheencodingwassuccessfulbypassingthecardthroughacard
reader.
Supported Escape Codes
Theescapecodedefinesthetrackforthedata.Becausethedataformatforeach
trackissetintheprinter,youmustenterthetypeofdatatheformatrequires.The
tablebelowshowsthedefaultISOformatdata,andhowthedatalookswhen
formatted.Thesyntaxcolumnshowsthegeneralstatementforhowthedata
mustbeprovided.Foreachtrackther eisanexampleofhowthedatalooks.
Syntax Track Example Manufacturer
~<track#><data> 1 (IATA) ~1ENCODING WITH ESCAPES Eltron/Zebra
2 (ABA) ~21234567890
3 (TTS) ~31234567890
~<track#>=<data> 1 (IATA) ~1=ENCODING WITH ESCAPES Atlantek
2 (ABA) ~2=1234567890
3 (TTS) ~3=1234567890
~<track#>
<Start Sentinel>
<data> <End Sentinel>
1 (IATA) ~1%ENCODING WITH ESCAPES? Datacard HiFX, RP90x,
and SRxxx; JVC; and
Fargo
The only Start Sentinel
permitted for tracks 2
and 3 is a semicolon (;)
2 (ABA) ~2;1234567890?
3 (TTS) ~3;1234567890?