User`s guide

XPS Card Printer Driver Guide 59
4.
ClickOKtosavethesetting,andthenclick
ApplyontheLayouttab.
5. Sendthecardtoprint.
Setting the Print Area
TheCardPrinterDrivercanpreventprintingandapplyingatopcoatonspecific
areasofthecard.Whencardsincludeamagneticstripe,asmartcardchip,
signaturepanel,orotherareathatmustremainunprintedorwithouttopcoat,
definethatareawithadriverpre‐setmask.These pre‐setmasksautomatically
applythedimensionsandlocationsofsmartcardchipsandmagneticstripesfor
printblocking.
Formoreinformationonnon‐printingareasofacard,refertotheprinter’s
InstallationandAdministrator’sGuide.Forcustom‐definedareas,ortodefine
morethanoneblockingareapersideofacard,ref erto“UsingPrintBlocking
Escapes”onpage61.
Todefinepre‐setma sksformagneticstripeorsmartcardareas,dothefollowing:
1. OpenthePrintingPreferenceswindow.
2. SelectthePrintAreatab.
3. Forthesideofthecardwiththenon‐printing
area,selectPrintandtopcoatentiresideof
cardexcept,andthenselecttheareafromthe
list.
Theexampleshownblocksprintingonthe
ISO3‐TrackMagneticStripeareaontheback
ofthecard.Textshownonthebackis
formattedwithamagneticstripefontandis
encoded.
4. ClickApplytosavethesetting,andthenclick
OK.
5. Sendthecardtoprint.