User`s guide

48 Card Design Tasks
B. SelectthetypeofribbonfromtheRibbonType/Split‐RibbonPanelsdrop‐
downlist.
C. ClickOKtoclosetheAdvancedOptionswindow.
D. Ifyouchangedthesettings,clickApplytostorethechanges.
4. Selecttopcoatandprintblockingoptions.
A. SelectthePrintAreatabandselectthedesiredoptionsforthefrontside
andbacksideprintareas.
B. Ifneeded,fromthedrop‐downlistforPrintandtopcoatentiresideof
cardexcept,selectthedesiredsmartcardormagneticstripeoption.
C. Ifyouchangedthesettings,clickApplytostorethechanges.
5. Settheprintresolution.
A. SelectthePrintModetabtodisplaythePrintresolutionoptions
B.
Selectthedesiredprintresolution.ThePrintModetabhasthefollowing
threeoptions.(Alloptionsmaynotbeavailableforallprintersandappear
grayedout.)
• Alwaysusestandardresolution(300x300dpi)—thisisthedefault
value
• Alwaysusebestresolution(notavailableataclientPC)
• Custom
IftheCustomoptionisavailableandyouselectit,selectthe
resolutionsfromtheColorandMonochromedrop‐downlists.
C. Ifyouchangedthesettings,clickApplytostoreyourchanges.
6. ClickOKtoclosethePrintingPreferenceswindow.
Writedownthesettingsfortheribbontypeonthehost.Whenyousetup
eachclientPC,selectthesamesettingyouselectedonthehostPCforthe
ribbontype.
ForclientPCsetup,selectthesamesettingyouselectedforthehostPC
printresolution.