User guide

54 System Tools
• Selecting None from the ColorManagement dropdown list disables color
management in the printer and color management will be handled by the
application.
2. Card Registration and Trail Trim are valuable settings when fine tuning the
card design. See “Fixing Ribbon Break Errors” for steps to follow.
• Card Registration is used to set the starting location of the printed area.
• Increasing this value moves the printing closer to the leading edge of
the card.
• Decreasing this value moves the printing away from the leading edge
of the card.
• Trail Trim adjustment helps when frequent ribbon break errors occur.
• Increase the value to increase the length of the printed area.
• Decrease the value to shorten the length of the printed area.
3. Click the Set Current button to apply your changes.
Pick
Pick settings are available for WebService access level only. Contact your service
provider for information about changing the printer’s pick settings.
Transport
Transport settings are available for WebService access levels only. Contact your
system administrator for information about changing the printer’s pick settings.
Flipper
Flipper settings are used to set values for the duplex module in duplex-option
printers. Flipper settings are available for WebService access level only. Contact
your service provider for information about changing the printer’s flipper
settings.