User guide

50 System Tools
Communication
The Communication menu provides the WebAdmin access level with settings to
change the Ethernet address method from DHCP to Static. WebAdmin access
level users can also enter IP Address, Subnet Mask and Gateway Address to
match the settings of the network.
1. Select DHCP or Static from the Current Value dropdown list.
2. Enter the appropriate settings for the choice entered in Step 1.
3. Click the Set Current button to apply your changes. If the information on this
page has changed, Log Out of the Printer Manager and then restart it to
continue to make system changes using the Printer Manager.
ActivityLog
The Activity Log menu choice displays technical information about the printer. A
WebAdmin or WebService access level can change settings in the Activity Log to
help troubleshoot and isolate a card production problem.
Description Default Value Current Value (unit)
EthAddressMethod DHCP DHCP 
EthGatewayAddress 0.0.0.0
EthIpAddress 0.0.0.0
EthSubnetMask 0.0.0.0 255.255.255.0
Description Default Value Current Value (unit)
ExternalLog Disabled Disabled 
ExternalLogServer 0.0.0.0 0.0.0.0
FilterCardActions Notice Off (Critical, Error, Warning,
Notice, Information, Debug)
FilterConfigChanges Notice Off (Critical, Error, Warning,
Notice, Information, Debug)
FilterJobStates Notice Off (Critical, Error, Warning,
Notice, Information, Debug)
FilterSoapMegs Notice Off (Critical, Error, Warning,
Notice, Information, Debug)