User`s guide

SD/CD Series Card Printers User’s Guide 43
•
Donottouchthecardsurfacetobeprinted.
• Handlecardsbytheiredges.
• Weargloves.
2. PresstheUSERbuttontoresumeorclickRetry(orResumethecard)inthe
Messagebox.
124: Insert same card side 2 up
Thecardmustbere‐insertedwiththebackofthecard(side2)
facingup.
Toinsertthesamecardwithside2up:
1. Turnthecardover,endtoend.Makesuretoturnoverthecardtotheback
side(side2)forthisjob.Referto“CardHandling”intheSD/CD™SeriesCard
PrinterInstallationandAdministrator’sGuide.
• Donottouchthecardsurfacetobeprinted.
• Handlecardsbytheiredges.
• Weargloves.
2. Insertthecardwiththebacksideupinthemanualfeedslotoftheprinter.
3. PresstheUSERbuttontoresumeorclickRetry(orResumethecard)inthe
Messagebox.
149: Option not installed
Dataforhardwarethatisnotincludedinthe
systemwassent.
1. Press the USER button or click OK (or
Cancel the card) in the Message box to
cancel the error.
2. Removethedatafromthecarddesign.
3. Resendthecard.
HINTS&TIPS
Don’tincludereferencesinthecardformattohardwarethatcannotbeaccessed
bythesystem.Formoreinformation,refertoyourIDsoftwaredocumentationor
yoursystemadministrator.