User`s guide

SD/CD Series Card Printers User’s Guide 39
114: Cover opened during job
Theprintercovermustbeclosedtoprint.
1. Closethecover.
2. Pushdownonthecornersofthecovertolatchit.
3. PresstheUSERbuttonontheprinterorclickRetryin
theMessagebox.
4. Discardanyincompletecards.
HINTS&TIPS
Makesurethattheribboncartridgeisinstalledwiththehandleevenwiththe
edgesoftheprinter.
115: Wait for print temperature
Theprinterisnotatthecorrecttemperaturetoprintthecard.
1. Printingthecar dmay resumeonitsown
OR
PresstheUSERbuttonontheprinterorclickRetry(or
Resumethecard)intheMessagebox.
2. Discardanyincompletecards.
HINTS&TIPS
Makesurethatyouhavechosenthecorrectprinterintheapplication.Askthe
systemadministratorforassistanceifneeded.
116: Magstripe not available
Opentheprintercoverandlookattheconfigareaofthelabelinside.
DoesthelabelshowMorJ?
• Ifyes,theprinterhasamagneticstripeoptionthatisnotworking.
A. PresstheUSERbuttonontheprinterorclickOK(orCancelthecard)inthe
Messagebox.