User`s guide

38 Troubleshooting
112: Card hopper empty
Theprinterdoesnotdetectcardsintheinputhopper.
1. Opentheinputhopper.
2. Insertcardsintheinputhopper.Topreventcards
fromstickingtogether,slideorfancardstoseparate
theedgesbeforeloadingtheinputhopper.Referto
“CardHandling”intheSD/CD™SeriesCardPrinterInstallationand
Administrator’sGuide.
• Orientallcardsinthe samedirection.
• Donottouchthecardsurfacetobeprinted.
• Handlecardsbytheiredges.
• Weargloves.
3. Closetheinputhopper.
4. PresstheUSERbuttonontheprinterorclickRetry(orResumethecard)inthe
Messageboxtoresumeprinting.
113: Close cover to continue
Theprintercovermustbeclosedtoprint.
1. Closethecover.
2. Pushdownonthecovertolatchit.
3. PresstheUSERbuttonontheprinterorclickRetry
(orResumethecard)intheMessagebox.
HINTS&TIPS
Makesurethattheribboncartridgeisinstalledwiththecartridgehandleeven
withtheedgesoftheprinter.