User`s guide

SD/CD Series Card Printers User’s Guide 33
102: Card not in position
Thecarddidnotreachthepositionforthe
nextaction,suchasprintingorejectingthe
card.
1. Opentheprinterandremovetheribbon
cartridge.
A. Checktheribbontomakesurethat
itisnottorn.Referto“ 1 10:Print
ribbon outormissing ”onpage 36
tofixtheribbonifneeded.
B. Removeanydebrisfromtheprint
area.
2. Turntheknobtomovethecard.
3. Removethecard.
4. Replacetheribboncartridgeandclosetheprinter.
5. PresstheUSERbuttonontheprinterorclickRetryinthe Messagebox.
103: Printer problem
Theprinterhasaproblemthatpreventsit
fromcompletingthecard.
1. PresstheprinterPOWERbuttontopower
itoff.
2. PresstheprinterPOWERbuttontopower
itonagain.
104: Critical problem
1. PresstheprinterPOWERbuttonorclick
OK(orCanceltheCard)intheMessage
boxtopowertheprinteroff.
2. Requestservice.Theprinterneedsto
remainoffduetoaninternalproblem.