User`s guide

SD/CD Series Card Printers User’s Guide 23
B.
Placethecleaningcardintheinputhopperorinthemanualfeed.
C. PresstheUSERbuttontoresumeorclickRetry(or
Resumethecard)intheMessageboxtostartthe
cleaningcycle.



Theprintermov esthecardthroughtheprinterseveral
timesandejectsitintheoutputstacker.
4. Removetheusedcleaningcard.Waitafewminutesfortherollerstodry.
5. Preparetheprinterforuse.
A. Replacethecardsintheinputhopper.
B. Replacethecleaningsleeveontheribboncartridgewithanewsleeve,
andremovethe protectivecover.Referto“LoadingtheCleaningSleeve”
onpage 18forthestepstofollow.
C. Replacetheribboncartridgeandclosetheprinter.Theprinterisreadyto
printcardsagain.
D. Discardtheusedcleaningcardandcleaningsleeve.
HINTS&TIPS
•
Usethecleaningcardandcleaningsleeveonetimeonly.
• Changethecleaningsleeveeachtimeyoucleantheprinterorchangethe
printribbon.