User`s guide

20 System Maintenance
Clean the Printhead
Cleantheprintheadwhen:
• Theprintheadisreplaced.
• Thereareunprintedlinesonthefinishedcard.Thisusuallyindicatesdirtor
contaminationontheprinthead.
• Theprintheadisaccidentallytouched.Oilsfromhandsmayaffectprint
quality.
1. Powerofftheprinter.
2. Opentheprintercoverandremovetheprintribboncartridge.
3. Openthecleaningpen.
4. Usinggentlepressure,movethecleaningpen
backandforthalongthefulllengthofthe
printheadedgeuntilitiscompletelyclean.
5. Replacetheprintribboncartridgeandclosethe
printercover.Avoidbumpingtheprintheadwhen
installingtheprintribboncartridge.
6. Powerontheprinter.