User`s guide

16 Using the System
Load and Replace Supplies
Topreparetheprintertoprintcardsyouloadblankcardstockintotheinput
hopper(optional),andloadprintribbonandacleaningsleeveintotheprint
cartridge.
Loading Cards
Dooneofthefollowing:
• Ifyouareusingamanualfeedprinter,skipthisstepandkeepasupplyof
blankcardsclosetotheprinter.
• Forprinterswithaninput
hopper,continuewiththese
steps:
1. Opentheinputhopper.
2. Fancardsbeforeplacing
themintotheinput
hopper.
3. Insertmagneticstripe
cardswiththestripe
downandtowardthe
rightsideoftheinput
hopper.
4. Closetheinputhopper.