User`s guide

SD/CD Series Card Printers User’s Guide 11
LCD Panel
TheLCDpanelshowstheprinter’smenusanddisplaysprintermessagesor
conditions.Referto“RespondtoMessages ”onpage32formoreinformation.
Menus
Themenusystemhasthree
majorbranches:
• UsetheMaintenance menu
torunacleaningcardora
testcard.
• UsetheStatus menutosee
settingsanddataaboutthe
printer.
• UsetheConfigurationmenu
tochangesettings.
HINTS&TIPS
•
Themenusystemcanbe
accessedwhenReady
displaysonLine1oftheLCD
panel.
• TheprinterreturnstotheReadystatusaftertwominutesofnoactivity.
Changesnotappliedarelost.
• Toleaveaselectionwithoutchangingthevalue,presstheENTER key
repeatedlyuntilReadydisplays.
User Button and Light
TheprinterhasaUSERbuttonwitharingoflight.Itsusesare:
• Tosuspendprinteractivity,presstheUSERbuttonwhenitdisplaysReady.
• Toclearamessage,presstheUSERbuttononce.
• Toclearallmessages,presstheUSERbuttonfor2secondsormore.
• Toclearallcardscurrentlyprinting,pressandholdtheUSERbuttonagainfor
twoormoreseconds.(Makesurethatthisactionisallowedinyourcard
system.)