User guide

SD/CD Series Card Printers OpenCard Data Format Guide 47
•
If you want this card layout to be the default SP/CP Series card format, then save to the
file named Default.
•
If you use the @G command to indicate the name of the card layout in the data stream,
you must save the file using one of the following names:
• 0
• 1
• 2
• 3
• Where 0, 1, 2, or 3 corresponds to the specified @G0, @G1, @G2 or @G3 name of the
card layout in the data stream. Make sure to save the file with no extension.
8. Continue to “Importing a Card Format or Card Layout File” on page 51 to import the card
layout to the printer.
Using Legacy Graphic/Logo Files
Legacy graphic/logo files are not automatically exported with the card layout. Instead, you must
import legacy graphics separately using Printer Manager. For more information about importing
Legacy files using Printer Manager, refer to “Importing a Graphic/Logo File” on page 53.
When importing legacy logos originally created for SP/CP Series printers card layouts, you must
use the original monochrome logos in TIFF format and name them one of the following:
• OpencardLogo1
• OpencardLogo2
• OpencardLogo3
• OpencardLogo4
Where 1, 2, 3, and 4 correspond to the original graphic/logo name in the data stream.
• The file name Default is case sensitive. Make sure to save the file as
Default with no extension.