User guide

SD/CD Series Card Printers OpenCard Data Format Guide 43
Chapter 4: Exporting Legacy
Card Layouts, Graphics, and
Fonts
This chapter provides information about using existing Legacy card
layouts from SP/CP Series printers to print on SD/CD Series printers
with OpenCard. This includes how to export Legacy card layouts,
how to use Legacy graphics/logos, and how to use Legacy fonts.
Exporting Card Layouts from Legacy Series
Printers with Telnet
A card layout refers to Legacy card layout files originally created for the SP/CP Series card
printers. You can export these card layouts, save the exported definition to a file, and then
import the card layout files for use with OpenCard on SD/CD Series printers.
For more information about setting up Legacy SP/CP Series card layouts, refer to the Legacy SP/
CP Series Data Formatting Guide.
1. Make sure that the PC is connected to the network using TCP/IP.
2. Establish a Telnet connection to the printer.
3. Enter the following at the command prompt or command line:
telnet ipaddress
Where ipaddress is the IP address displayed on the LCD panel of the printer (Printer
Ready>Main Menu>Status>Status Menu>Network>Address Mode>DHCP (or Static)>Data
Format>Open Card>IP Address>IP address of printer.