User guide

SD/CD Series Card Printers OpenCard Data Format Guide 11
1.
Before you start, make sure that your printer meets all requirements.
2. Make sure that the SD/CD Series card printer is connected to the computer with a TCP/IP
interface.
3. Open Printer Manager. For instructions, refer to “Opening Printer Manager” on page 49.
4. Select Printer Setting > Behavior.
5. Change the setting for PlugIn to Enabled by clicking the corresponding arrow and selecting
Enabled.
6. Click Set Current to save the setting.
7. Log out of Printer Manager.
8. Power cycle the printer for the new setting to take effect. When the LCD panel displays
Ready in line 1 and an asterisk (*) in the lower-right corner, OpenCard is enabled on the
printer.
Disabling OpenCard with Printer Manager
1. Open Printer Manager.
2. Log In as WebAdmin or WebService.