User guide

10 Getting Started
D. Press ENTER key to enter the Configuration menu.
2. Enable or Disable Opencard.
A. Press the down arrow key until OpenCard displays on line 2 of the LCD panel.
B. Press ENTER key to enter the OpenCard menu.
C. Press the down arrow key until Enable or Disable displays on line 2 of the LCD panel.
D. Press the ENTER key. Apply/Restart displays on line 2 of the LCD panel.
E. Press the ENTER key again to apply the setting change. Standby/Rebooting displays on the
LCD panel and the printer powers off and then on again.
When the LCD panel displays Ready in line 1 and an asterisk (*) in the lower-right corner,
OpenCard is enabled on the printer.
Enabling OpenCard with Printer Manager
To enable OpenCard with Printer Manager, you must have a Printer Manager account access
level of WebAdmin or WebService. Refer to your printer’s Installation and Administrator’s Guide
for more information about assigning Printer Manager access levels.