User guide

SD/CD Series Card Printers OpenCard Data Format Guide 9
Other Requirements
• If your organization uses the Legacy Option, you need a Telnet interface that provides card
layout menus for exporting existing SP/CP Series card layouts.
• For additional information on system set up requirements, except as noted in this guide, refer
to your printer’s Installation and Administrator’s Guide.
Enabling and Disabling OpenCard
The printer’s OpenCard option is activated upon shipment. Should you require to disable or enable
the OpenCard option, you can do this either from the printer’s LCD menu or from Printer Manager.
Enabling or Disabling OpenCard with the Printer’s LCD Menu
Use the following procedure to enable OpenCard for SD/CD Series printers from the front panel
LCD menu.
1. Enter the menu system.
A. Press and hold the USER button.
Suspended displays on line 1 of the LCD panel.
B. Press the ENTER key to enter the menu system.
C. Press the down arrow key until Configuration displays on line 2 of the LCD panel.
Some printer, network, and system set up requirements for SD/CD Series card
printers are overridden by the specifications in this guide.
SD/CD Series card printers with OpenCard enabled are not recognized or supported
by the XPS printer driver.