Datasheet

Illustrated Parts 13
Magnetic Stripe Options
 Note: After replacing any of the magnetic stripe components listed below,
you must complete the Calibrate MS Head procedure as described in the
Adjustments chapter of the service manual.
Item Part Number Description Qty
1 566320-001
566320-002
3-Track Interface Board
1-Track Interface Board
1
2 566753-001 Registration Sensor 1
3 568286-001
568287-001
3-Track Magnetic Stripe Head
1-Track Magnetic Stripe Head
1
4 562738-998 Rocker Assembly (Includes all items listed below) 1
5 566940-001 Rocker 1
- 566754-001 Encoder Cable 1
6 809413-001 Encoder
1
1
7 809429-108 Screw, M1.8-0.80 x 8 2
1
Datacard strongly recommends replacing the entire Rocker Assembly (PN 562738-998) if the encoder
needs to be replaced. Rocker assemblies are tested at the factory for ISO 7811/JIS x6302 compliance for
jitter, but individual encoders are not tested.