Spec Sheet

Entrust Datacard, Datacard, CR805, TruCredential and the hexagon design are registered trademarks, trademarks and/or service marks of Entrust
Datacard Corporation in the United States and/or other countries. MIFARE is a registered trademark of Philips Semiconductors Gratkorn GmbH.
Names and logos on sample cards are fictitious. Any similarity to actual names, trademarks or tradenames is coincidental.
©2017 Entrust Datacard Corporation. All rights reserved.
DP16-9037-001
Corporate Headquarters
Phone: [phone]
www.datacard.com
[e-mail]
ENTRUST DATACARD™ CR805™ CARD PRINTER WITH INLINE LAMINATION MODULE
• Optional lock secures cards, ribbons and retransfer film
• Secure storage for rejected cards with optional lock
• Easy to load color ribbon and retransfer film
• Ethernet or USB port for network connectivity
• Inline debower flattens cards after printing
• Selectable color modes available via LCD screen
• Optional smart card or mag stripe encoding
• Secure Boot to prevent system startup if threat detected
• TPM module to insert, store and remove certificates and keys
Build a complete card issuance
solution with Entrust Datacard
The CR805 card printer works with
Datacard TruCredential
TM
software,
certified supplies and global services to
give you a complete ID issuance solution
that delivers exceptional results.
CR805 Printer Standard Features and Specifications
Print technology Retransfer pigment ink
Print capabilities Single or dual-sided, over-the-edge printing
Print resolution 600 dots per inch (dpi)
Print speed Full color printing
Single-sided (CMYKP) – up to 100 cards per hour (cph)
Double-sided (CMYKP-KP) – up to 66 cards per hour (cph)
Color modes True Color (ICC) – prints color as close as possible to image as defined in the card design
Legacy SR/CR – Close match to the CR500 Instant Issuance System
Vivid – printer colors with higher saturation and contrast
Card capacity Input hopper – 125 cards
Output hopper – 25 cards (Optional 125 card)
Card input size – 0.030 inches to 0.040 inches (0.76 mm to 10.01mm)
Operating environment 60°F - 95°F (15°C - 35°C)
Physical dimensions L 21.4 in. x W 10.1 in. x H 15.6 in.
L 54.34 cm x W 25.53 cm x H 39.68 cm
Weight 28 lb. (12.7 kg); with options will vary
Connectivity USB and Ethernet
Warranties Printer: 36 month standard warranty
Printhead: Limited lifetime warranty
CR805 Optional Features and Supplies
Magnetic stripe encoding ISO/IAT Magnetic Stripe Encoding
JIs Magnetic Stripe Encoding
SmartCard encoding Single wire – Contact ISO 7816 T=0, 1
Contactless ISO 14443 A/B Protocols, Mifare Protocols &FeliCa (DES & AES)
Loosely Couple – Contact ISO 7816 T=0, 1
Contactless ISO 14443 A/B Protocols, Mifare Protocols &FeliCa
HID iCLASS, Read/write or read-only encoder
PC Prox
Color ribbons CMYKP 1000 images (single-sided);
500 images (dual-sided)
CMYKP-KP 750 images
CMYP-KPi 750 images
CMYKP-KPi 500 images
FCMYP-KP 750 images
Clear retransfer film Two options:
1000 images (single-sided), 500 images (dual-sided)
1500 images (single-sided), 750 images (dual-sided)