User`s manual
To use up arrow key “ — “ or down arrow key “ ˜ “ to select port for destination PC name.
After you have selected the PC port already, you can press the ENTER Key to switch the
PC port you want immediately
To use “ PgUp “ key or “ PgDn” key for selecting previous or next Bank no. (or Box No.)
To press “ INS” key for
editing PC name.
After finishing the edit, please press “ Enter “ key for saving information.
To use “ Tab “ key to select items like Bank, OSD, SCAN, CHANGE PASSWORD,
CONSOLE ON/OFF, etc…
a. The “ OSD: 10 SEC” means
that the OSD windows
display or PC system name
exists 10 sec. on your
monitor. You can modify it
from 05 sec to 99 sec. The
factory default value is 10
sec..
b. The “ SCAN TIME” means that scan interval from one PC port to next PC port. The
default SCAN time is 10 sec and the maximum scan time is 99 sec.
c. The “ CHANGE PASSWORD” is for user to avoid all PC systems to be intruded by the
other person. The default password is 8 digits “ 00000000 “.
There is an enter password window showed out when you select this item and then
press the Enter. The maximum password is eight digits. After you key in the
password already and press the Enter key, there is another window for confirming
your typed password.
15
SYSTEM 15
16 SYSTEM 16
OSD : 1 0 SEC.
E
CHANGE PASSWORD
SCAN: 1 0 SEC. CONSOLE ON/OFF
ESC : QUIT ENTER :COMPLETE
TAB : NEXT INSERT :EDIT
BANK : 1
01 SYSTEM 01
02
SYSTEM 02
E
ENTER PASSWORD :
ESC : QUIT ENTER : COMPLETE
ENTER NEW PASSWORD :
ESC : QUIT ENTER : COMPLETE
RETYPE NEW PASSWORD :
COMPLETE
ESC : QUIT ENTER : COMPLETE