User`s manual

To select PC port:
+ +
+ + = Beeper
(Note: The default Beeper function is ON and beeper
control is only for available for Scan Mode )
+ + = Auto Scan
To get out of Auto Scan Mode, Press any key or SPACE bar.
+ + = OSD default value
(Note: Not including password)
+ + = Search the same PC name
(Note: Search PC name starting from 1
st
PC port)
+ + Space bar = On Screen Display Menu
Example ：
A. To access a computer attached to Port 6 of the fifth Bank. You can press through hot key as below:
Scroll lock + Scroll lock + “ 5 “ + “ 0 “ “ 6”
B. To access a computer attached from Bank 3 to Bank 4, You can press through hot key as below:
Scroll lock + Scroll lock + Page Down
Note:
Bank no. and Port no. selection must be made using the numeric keys on the keyboard. Numeric keys on the
keypad are not available as a hot key command.
ROM REFLASH
F I N D : 
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
B
S
R
F
Bank
No
Port
No
Port No.
1~4 (4 port)
1~8 (8port)
1~16 (16 port)