User manual

SW Main for firmware update (for technical support only)
DIP Switch Position Pin#1 Pin#2 Pin#3 Pin#4
Normal Operation
Mode
6
OFF [©] OFF [©] ON [ª] OFF [©]
Firmware Update
Mode
7
ON [ª] ON [ª] OFF [©] OFF [©]
Note
6
Factory default for SW Main: Pin#1-OFF [©], Pin#2-OFF[©], Pin#3-ON [ª],
Pin#4-OFF
[©]. PLEASE MAINTAIN THIS SETTING AT ANYTIME FOR REGULAR USE!
7
Sequence for firmware update
[1]. Power off the MT-H00404-0C.
[2]. Set the DIP switch position to Firmware Update Mode.
[3]. Power on the MT-H00404-0C.
[4]. Power off the MT-H00404-0C.
[5]. Set the DIP switch position to Normal Operation Mode.
[6]. Power on the MT-H00404-0C.
7 / 15