Specifications

Shop online now at: www. .com
Interactive &
Projectors
Signage/3DConnectorsCamerasDVRs Brackets Racks &
Cabinets
344
Cables Faceplates
AV Signal
Distribution
• VAMS-0808: 8 In-8 Out Audio &
Video Matrix
A simple, yet effective 8 input / 8 output BNC Audio & Video Matrix
Unit, allowing selection and allocation of separate audio and video
signal sources.
This incredibly cost effective, 19” rack mounting unit features simple
selection switches and highly visible LED display on the front panel
to show which input (audio & video) is routed to which output.
Alternatively, the unit can be controlled using RS232 via Crestron, AMX
or Extron systems or equivalents via a 9pin D type connector.
Units may also be cascaded to increase the flexibility and application
of the devices using the serial connector on the rear of the unit.
Features:
• 8 Audio/Video input & output with A/V thermal noise protection
• Low cross-talk and wide-band frequency response (±0.5dB)
• Allows system extension via cascading units (max. 4 units)
• RS-232C port for data communication
• Lock-out function on front panel controls
• Restores to the final stage setup in a case of power loss
• 19” rack mounting unit
Rs-232c Jack
Video Inputs 1 ~ 8
Video Output 1 ~ 8
Audio Input
Audio Output
Select In/out
Ac Input
Specications: Control
Model: VAMS-0808
Interface RS-232C
Data Bit 8 bit
Stop Bit 1 bit
Power Requirement 230v AC, 50/60Hz
Dimensions 482(W) x 88(H) x 220(D) mm
Specications: Audio
Model: VAMS-0808
Input/Output Impedance 2.2VP-P.High Impedance Unbal/RCA
T.H.D+N(20Hz-20kHz) <0.1%
Frequency Response (20Hz ~ 20kHz): <±3dB
Signal/Noise Ratio >90dB
Crosstalk <-90dB
Specications: Video
Model: VAMS-0808
Input/Output Impedance 1VP-P 75W Composite Video BNC
Frequency Response (7MHz) Below 0.5dB
Input/Output Level 1VP-P 140 IRE
Signal/Noise Ratio 60dB
Crosstalk -60dB