Instruction manual

8
Menu Options
1. Picture
- Press the MENU button once to display the Picture setting menu.
- Press the ENTER button to highlight the Brightness setting.
- Press the UP or DOWN button to highlight the setting that needs to be adjusted.
- Press ENTER button to select the Brightness setting.
- Press the UP or DOWN button to adjust the Brightness value between 0 and 100.
- Press ENTER button again to save and return to the Picture setting menu; now highlight
another Picture setting to be adjusted. To select a different setting (Contrast, Saturation,
Tint, Color Temp*) use the UP / DOWN buttons. Follow the same procedure to set the
other values.
- Keep pressing the MENU button to cycle through the main menu options.
- Press the SOURCE button to exit the menu mode.
* NOTE: Colour Temp can be set to 9300, 7500, 6500, 5400 or User RGB values
2. Audio
- Press the MENU button twice to display the Audio setting menu.
- Press the ENTER button to highlight the Indicator setting.
- Press the ENTER button again to toggle the on screen audio indicator ON/OFF.
- Keep pressing the MENU button to cycle through the main menu options.
- Press the SOURCE button to exit the menu mode.
3. Function.
- Press the MENU button three times to display the Function. Settings menu.
- Press the ENTER button to highlight the Center Mark setting.
- Press the ENTER button to toggle the on screen Center Mark ON/OFF.
- Press the UP or DOWN button to highlight the Safety Zone setting.
- Keep pressing the ENTER button to cycle through the values 80%, 90% or OFF.
- Press the UP or DOWN button to exit the Safety Zone setting. To select a different setting
(4:3 Screen, Cinema Zone) use the UP or DOWN buttons.
Follow the same procedure to set the next setting.
- Keep pressing the MENU button to cycle through the main menu options.
- Press the SOURCE button to exit the menu mode.
4. Setup
- Press the MENU button four times to display the Setup setting menu.
- Press the ENTER button to highlight the OSD Timer setting.
NB: OSD Timer sets how long the setting menus will stay on screen.
- Press the ENTER button again to display the OSD Timer setting position.
- Press the UP or DOWN button to set the OSD value between 5 to 60 SEC.
- Press ENTER button to save the OSD value.
- Press the UP or DOWN button to highlight the OSD Blending setting.
NB: OSD Blending sets how transparent the setting menus will be on screen.